Yocan Evolve 2.0 light blinking 3 times

dusty.morrison · Post by **dusty.morrison** » Fri May 10, 2019 6:03 am

Hi All,

I got my yocan evolve 2 last week and tried it out with the concentrate pod. It worked great with a couple of light uses, then the light started blinking 3 times when I press the button. I’ve tried fully charging it, turning off and on, put a new pod in - and nothing works. Same 3 flashes each time I press the button.

Any help would be appreciated!

Cheers

Jimmy · Post by **Jimmy** » Fri May 10, 2019 9:05 pm

https://www.yocantech.com/yocan-evolve- ... nload.html

dusty.morrison · Post by **dusty.morrison** » Thu May 16, 2019 2:43 am

Thanks for the link. I’m aware that 3 blinks means no atomiser. My issue is that is have tried several new atomisers, cleaned connections, etc and still get this error on what is basically a brand new device.

Any advice on what else I could try, or is this just a defective unit?

Jimmy · Post by **Jimmy** » Sun May 19, 2019 9:33 pm

Please can you send a video about blinking issue to yocanonline@gmail.com
I will forward it to our engineers.
As for the afer-sale service, please can you fill out on www.yocantech.com/contact
Our support team will contact you ASAP.

JBeltran · Post by **JBeltran** » Sat Jul 06, 2019 1:35 pm

dusty.morrison wrote: ↑
Fri May 10, 2019 6:03 am
Hi All,

I got my yocan evolve 2 last week and tried it out with the concentrate pod. It worked great with a couple of light uses, then the light started blinking 3 times when I press the button. I’ve tried fully charging it, turning off and on, put a new pod in - and nothing works. Same 3 flashes each time I press the button.

Any help would be appreciated!

Cheers

—————

Sometimes you can overtighten the cartridge/ pod and cause a connection issue ... It can also be that you need the pod ...

BKBT · Post by **BKBT** » Mon Nov 18, 2019 6:06 pm

Hi, did anyone ever figure out what the problem is? I'm having the same issue. I put in the pod, it clicks in to the magnets and when I push the button it blinks 3 times. I've tried it on all 3 levels, turned the pod around & tried a different pods with no luck. I've turned out off & left it off overnight. It's fully charged.
I've got the salt nic pod in there.
1 thing I noticed that looks different from what's in the manual is that the center chimney sticks out below the bottom of the pod on my salt nic pod & it doesn't look like that in the manual. The other pod doesn't have that feature but it still has the same problem.
IDK - any ideas?
Thanks for any help