Page 1 of 1

Yocan Evolve 2.0 light blinking 3 times

Posted: Fri May 10, 2019 6:03 am
by dusty.morrison
Hi All,

I got my yocan evolve 2 last week and tried it out with the concentrate pod. It worked great with a couple of light uses, then the light started blinking 3 times when I press the button. I’ve tried fully charging it, turning off and on, put a new pod in - and nothing works. Same 3 flashes each time I press the button. :(

Any help would be appreciated!

Cheers

Re: Yocan Evolve 2.0 light blinking 3 times

Posted: Fri May 10, 2019 9:05 pm
by Jimmy

Re: Yocan Evolve 2.0 light blinking 3 times

Posted: Thu May 16, 2019 2:43 am
by dusty.morrison
Thanks for the link. I’m aware that 3 blinks means no atomiser. My issue is that is have tried several new atomisers, cleaned connections, etc and still get this error on what is basically a brand new device.

Any advice on what else I could try, or is this just a defective unit?

Re: Yocan Evolve 2.0 light blinking 3 times

Posted: Sun May 19, 2019 9:33 pm
by Jimmy
Please can you send a video about blinking issue to yocanonline@gmail.com
I will forward it to our engineers.
As for the afer-sale service, please can you fill out on www.yocantech.com/contact
Our support team will contact you ASAP.

Re: Yocan Evolve 2.0 light blinking 3 times

Posted: Sat Jul 06, 2019 1:35 pm
by JBeltran
dusty.morrison wrote:
Fri May 10, 2019 6:03 am
Hi All,

I got my yocan evolve 2 last week and tried it out with the concentrate pod. It worked great with a couple of light uses, then the light started blinking 3 times when I press the button. I’ve tried fully charging it, turning off and on, put a new pod in - and nothing works. Same 3 flashes each time I press the button. :(

Any help would be appreciated!

Cheers



—————

Sometimes you can overtighten the cartridge/ pod and cause a connection issue ... It can also be that you need the pod ...

Re: Yocan Evolve 2.0 light blinking 3 times

Posted: Mon Nov 18, 2019 6:06 pm
by BKBT
Hi, did anyone ever figure out what the problem is? I'm having the same issue. I put in the pod, it clicks in to the magnets and when I push the button it blinks 3 times. I've tried it on all 3 levels, turned the pod around & tried a different pods with no luck. I've turned out off & left it off overnight. It's fully charged.
I've got the salt nic pod in there.
1 thing I noticed that looks different from what's in the manual is that the center chimney sticks out below the bottom of the pod on my salt nic pod & it doesn't look like that in the manual. The other pod doesn't have that feature but it still has the same problem.
IDK - any ideas?
Thanks for any help