Yocan Cylo
Posted: Mon Dec 22, 2025 3:15 am
Hello everyone, a user has enquired about cleaning the Yocan Cylo. This post provides detailed steps and maintenance methods. Thank you for your support of Yocan products; we hope this guide proves helpful.
The Yocan Cylo features a sleek, well-crafted body, stylish design, and a colour display reminiscent of retro Atari games—a touch that complements its overall aesthetic. Its precise temperature control sets it apart in the vaping market, with a voltage range of 2.0V to 4.2V adjustable in 0.1V increments.
The 1400mAh battery capacity provides ample power for daily vaping needs, while the USB Type-C charging port ensures rapid recharging when required.
Cleaning your Yocan Cylo:
1. Safe disassembly
Switch off the device and allow the atomiser to cool completely before proceeding. Remove the coil from the device.
2. Routine cleaning: Dip a cotton bud in 75% medical alcohol and wipe along the coil's winding direction in a spiral motion.
3. Deep cleaning: Immerse the coil in water for no longer than 2 minutes. Gently brush crevices with a soft-bristled brush, then rinse thoroughly with clean water immediately.
3. Drying and reassembly: Blot surface moisture with lint-free paper towels. Allow to air-dry naturally in a well-ventilated area for 30 minutes (or use a hairdryer on cool setting from a distance).
Key tips:
▸ Ensure complete dryness after cleaning.
Would you like to learn more about our products and specifications? Please visit: Yocan
The Yocan Cylo features a sleek, well-crafted body, stylish design, and a colour display reminiscent of retro Atari games—a touch that complements its overall aesthetic. Its precise temperature control sets it apart in the vaping market, with a voltage range of 2.0V to 4.2V adjustable in 0.1V increments.
The 1400mAh battery capacity provides ample power for daily vaping needs, while the USB Type-C charging port ensures rapid recharging when required.
Cleaning your Yocan Cylo:
1. Safe disassembly
Switch off the device and allow the atomiser to cool completely before proceeding. Remove the coil from the device.
2. Routine cleaning: Dip a cotton bud in 75% medical alcohol and wipe along the coil's winding direction in a spiral motion.
3. Deep cleaning: Immerse the coil in water for no longer than 2 minutes. Gently brush crevices with a soft-bristled brush, then rinse thoroughly with clean water immediately.
3. Drying and reassembly: Blot surface moisture with lint-free paper towels. Allow to air-dry naturally in a well-ventilated area for 30 minutes (or use a hairdryer on cool setting from a distance).
Key tips:
▸ Ensure complete dryness after cleaning.
Would you like to learn more about our products and specifications? Please visit: Yocan