How to Properly Clean Your Yocan iCan
Posted: Wed Nov 11, 2026 1:12 am
Hey everyone! 
If you're using the Yocan iCan, you probably already know that keeping it clean is essential for the best flavor and performance. Over time, residue builds up and can affect your sessions.
Since deep cleaning is only recommended occasionally (low frequency / maybe just 1 time depending on your usage), it’s important to do it right so you don't damage your device.
Here is a quick, step-by-step guide on how to thoroughly clean your Yocan iCan:
Step 1: Disassemble
First things first—make sure the device is completely cool before you do anything. Once it's cool, carefully remove the coil from the device.
Step 2: Soak
Place the coil into a small container filled with isopropyl alcohol. Let it soak for a few hours. This is the most crucial step, as the alcohol will help dissolve any stubborn residue and buildup.
Step 3: Brush
After soaking, take a soft brush (like a dedicated cleaning brush or a soft-bristled toothbrush) and gently scrub away any remaining buildup on the coil. Be gentle so you don't damage it!
Step 4: Rinse and Dry
Rinse the coil thoroughly with warm water to wash away the alcohol and loosened residue. Then, allow it to air dry completely before reassembling the device. Do not put it back together or fire the device while it's still wet!
Pro-Tip: Because this is a deeper clean, you don't need to do this every day. Stick to regular light maintenance for your daily use, and save this full process for when you notice a significant drop in performance or flavor.
Hope this helps you keep your iCan hitting perfectly! Let me know if you guys have any other tips or questions down below.
If you're using the Yocan iCan, you probably already know that keeping it clean is essential for the best flavor and performance. Over time, residue builds up and can affect your sessions.
Since deep cleaning is only recommended occasionally (low frequency / maybe just 1 time depending on your usage), it’s important to do it right so you don't damage your device.
Here is a quick, step-by-step guide on how to thoroughly clean your Yocan iCan:
Step 1: Disassemble
First things first—make sure the device is completely cool before you do anything. Once it's cool, carefully remove the coil from the device.
Step 2: Soak
Place the coil into a small container filled with isopropyl alcohol. Let it soak for a few hours. This is the most crucial step, as the alcohol will help dissolve any stubborn residue and buildup.
Step 3: Brush
After soaking, take a soft brush (like a dedicated cleaning brush or a soft-bristled toothbrush) and gently scrub away any remaining buildup on the coil. Be gentle so you don't damage it!
Step 4: Rinse and Dry
Rinse the coil thoroughly with warm water to wash away the alcohol and loosened residue. Then, allow it to air dry completely before reassembling the device. Do not put it back together or fire the device while it's still wet!
Pro-Tip: Because this is a deeper clean, you don't need to do this every day. Stick to regular light maintenance for your daily use, and save this full process for when you notice a significant drop in performance or flavor. Hope this helps you keep your iCan hitting perfectly! Let me know if you guys have any other tips or questions down below.
