Yocan Vaping Forum

atktd22 wrote: ↑

Thu Mar 28, 2019 11:59 am

I've only had the Yocan UNI for 2 days and I cant get it to work. When I turn it on it blinks 3 times and everytime I press the button it blinks 3 times and does not heat up?

Same EXACT thing happend to me, 2 days after and all. I was screwing in the adapter too tight. Push the pin lever on the front all the way up( vertical switch) , and then loosen the adapter until it stops blinking. You MIGHT have to loosen it more than expected, but it worked for me. I almost bought a new one cuz I couldnt find the receipt and was panicking lol. All worked out in the end thank God

So I’ve spent wayyyy too much time on this. I finally broke the piece of junk open. The wires are so thin and solder points are even thinner. Most likely any small bump or drop will cause a wire to come loose and disconnect. In my case, one of the black (-) wires was loose at its connection to the battery. Nothing I could have done, short of opening this thing would lead to a permanent fix.

I now have it rigged to where I cut the 2 black and white wires where they connect to the mod box, and I put the white (+) wire (coming from the button) in the middle hole of my cart, and touch the outside metal part of the cart to the metal part of the USB port and it works. Not the simplest thing to do and it’s hard as hell to hold but it works until I get another battery…

Друзья, приглашаю Вас ознакомиться с новейшей технологией в криптовалютном Мире! Команда «Блокчейн по-русски» – это команда инвесторов-криптоэнтузиастов

Мы развиваем блокчейн-технологии и создаём к ним интерес через создание простых образовательных продуктов через Telegram.

Нашим флагманом являются практикум об основах криптовалютного рынка «Блокчейн по-русски» и академия «MineClub». Также мы являемся крупнейшим валидатором в сети блокчейна MinePlex. Подробней ознакомиться можно на официальном Telegram канале.





заработок в интернете