Page 1 of 1

Yocan Uni magnet adaptor question

Posted: Thu Jul 11, 2019 2:07 pm
by pleebs36
I got my Yocan UNI Mod about two weeks ago. My question is how often do I switch out the magnet piece that screws on the bottom of the cart.

Re: Yocan Uni magnet adaptor question

Posted: Thu Jul 11, 2019 11:52 pm
by Jimmy
If you don't have any connection issues with your UNI magnet adapter, I think don't need switch it.

By the way, if you need some new UNI magnect adapters, here is the link on our official site:
https://www.yocanonline.com/product/yoc ... -510-ring/

Good night.

Re: Yocan Uni magnet adaptor question

Posted: Fri Jul 12, 2019 11:36 pm
by dtheall
The magnet came out when I removed my first cartridge. I put it back in place, but now I get the 5 flashing lights indicating no atomizer even though there is a cartridge present.

Re: Yocan Uni magnet adaptor question

Posted: Sun Jul 14, 2019 8:54 pm
by Jimmy
There are two ways to fix UNI Mod flash issues: switch cartridge or loosen the adapter.
If you want to learn more information about Yocan UNI Mod Blinking Lights Troubleshooting, please read this article: https://www.yocanonline.com/yocan-uni-b ... available/

Re: Yocan Uni magnet adaptor question

Posted: Thu Oct 24, 2019 1:45 am
by skiddlydah
Hi, I have this problem as well and the troubleshooting didn't work. A small metal ring magnet came out with the adapter and I was able to get it back in and connect, but I'm getting the 5 blinking lights. As I put the magnet back in, I can't get it out to re-arrange. Help!!

Re: Yocan Uni magnet adaptor question

Posted: Thu Oct 24, 2019 4:31 am
by Jimmy
skiddlydah wrote:
Thu Oct 24, 2019 1:45 am
Hi, I have this problem as well and the troubleshooting didn't work. A small metal ring magnet came out with the adapter and I was able to get it back in and connect, but I'm getting the 5 blinking lights. As I put the magnet back in, I can't get it out to re-arrange. Help!!
Do you have a brand new UNI magnet adapter?
If so, please try to reload this new adapter.