Page 1 of 2

Yocan UNI Box Mod Troubleshooting

Posted: Mon Jan 07, 2019 2:41 am
by Jimmy
Yocan UNI Box Mod Troubleshooting issues collection thread.
If you have any question about this item, please comment below.
Thanks.

Re: Yocan UNI Box Mod Troubleshooting

Posted: Mon Mar 11, 2019 2:53 pm
by don.difrancesco
i get 3 lights blinking 5X, please help

Re: Yocan UNI Box Mod Troubleshooting

Posted: Mon Mar 11, 2019 9:21 pm
by Jimmy

Re: Yocan UNI Box Mod Troubleshooting

Posted: Tue Mar 12, 2019 10:40 pm
by Skeet
I just bought yocan uni. I can't get any lights. When charging two lights on the left are solid while the third blinks. This continues for 15 seconds or so then they all go out. Any ideas besides returning it for a refund. Feeling ripped off.

Re: Yocan UNI Box Mod Troubleshooting

Posted: Wed Mar 13, 2019 4:50 am
by Jimmy
Hi @Skeet
Thanks for your feedback.
As for your description, I think this item have some problem.
Please contact the shop after-service. (The shop that you bought)
If you have further question, please let me know.

Re: Yocan UNI Box Mod Troubleshooting

Posted: Wed Mar 13, 2019 6:38 pm
by CailynnW
My UNI Mod Box doesn’t seem to be vaping at all. I’m able to switch heat levels but it will not pre heat or burn. It tends to blink 3 times when I push it once. Please help, this is the third one I’ve bought.

Re: Yocan UNI Box Mod Troubleshooting

Posted: Wed Mar 13, 2019 9:05 pm
by Jimmy
@CailynnW
First of all, thanks for supporting our products.
As for your UNI, have you checked the connection betweet UNI battery and the cartridge?
If you have other cartridges, please try to connect different cartridge with your UNI box mod.

If you have further feecback, please let me know.
Happy vaping.

Re: Yocan UNI Box Mod Troubleshooting

Posted: Wed Jul 24, 2019 1:28 am
by jbcard
I received the battery today. It seems to have only green light ? Is there a different light for each voltage or not ?

Re: Yocan UNI Box Mod Troubleshooting

Posted: Sun Aug 11, 2019 1:18 pm
by jmq22
Hi,

I just bought a Yocan Uni yesterday and it was working great and all. But after taking it off the charger, it doesn't power on anymore, unless the charger is plugged in? Is this normal?

I was doing some troubleshooting and looked at the manual, but I didn't see anything about this situation. Any help or suggestions would be appreciated.

Re: Yocan UNI Box Mod Troubleshooting

Posted: Sun Aug 11, 2019 11:36 pm
by Jimmy
jbcard wrote:
Wed Jul 24, 2019 1:28 am
I received the battery today. It seems to have only green light ? Is there a different light for each voltage or not ?
Yes, please click the fire button 3 times to change voltage option.
By the way, UNI Mod has three voltage options:
 ! Message from: Jimmy
Low: 3.4V, 1 light on
Middle: 3.8V, 2 lights on
High: 4.2V, 3 lights on
Learn more FAQs on this page: https://www.yocantech.com/help-center#UNI