User Question: Why Doesn’t My 1g Cartridge Fit the Yocan Ziva 2.0?
Posted: Mon Mar 16, 2026 5:13 am
A user recently asked:
> “I bought a Yocan Ziva 2.0 and it doesn’t fit my 1g Spherex cell cartridge.”
Answer
The Yocan Ziva 2.0 supports most 1g–2g 510-thread cartridges, but cartridge designs can vary slightly between brands. For the cartridge to fit properly inside the device, the total cartridge height should be under 60 mm (not including the bottom electrode/contact pin). Some cartridges may use longer mouthpieces or extended chambers, which increases the overall height. If the cartridge exceeds this size, it may not sit fully inside the device.
What You Can Do
Thanks for being part of the community!
> “I bought a Yocan Ziva 2.0 and it doesn’t fit my 1g Spherex cell cartridge.”
Answer
The Yocan Ziva 2.0 supports most 1g–2g 510-thread cartridges, but cartridge designs can vary slightly between brands. For the cartridge to fit properly inside the device, the total cartridge height should be under 60 mm (not including the bottom electrode/contact pin). Some cartridges may use longer mouthpieces or extended chambers, which increases the overall height. If the cartridge exceeds this size, it may not sit fully inside the device.
What You Can Do
- Check the overall cartridge height to ensure it is under 60 mm
- Use standard-size 510 cartridges, which are widely compatible with the Ziva 2.0.
- If you’re unsure about a cartridge, comparing the height with another standard cartridge can help.
Thanks for being part of the community!