Page 1 of 1
How to fix the flashing blink of Yocan Evolve Plus?
Posted: Fri Jun 19, 2020 3:09 am
by Coco
Many fans ask regard the
Yocan Evolve Plus flashing problem.
Most of time, the flashing bling issues resulted with the incorrect connection.
Here are some tips to help you fix it.
1. Use a q-tip clean the contact points of coil, base and the battery.
2. Slide out the contact point of coil a little, as below screenshot.
- Slide out the contact point a little 20200619145706.png (129.64 KiB) Viewed 18328 times
3. Install a brand new coil.
If you can't fix this problem, please contact the shop you bought it from.
Any further question. please comment below.
Re: How to fix the flashing blink of Yocan Evolve Plus?
Posted: Thu Apr 01, 2021 6:26 pm
by codyaprice1985
I did exactly what the post said and its still flashing 10 times and I haven't been able to get it working yet since I purchased it. Are there any other possible solutions?
Re: How to fix the flashing blink of Yocan Evolve Plus?
Posted: Tue Apr 06, 2021 2:39 am
by Jimmy
codyaprice1985 wrote: ↑Thu Apr 01, 2021 6:26 pm
I did exactly what the post said and its still flashing 10 times and I haven't been able to get it working yet since I purchased it. Are there any other possible solutions?
Please charge your device. The Yocan Evolve Plus flashing 10 times means you have to charge your battery.
Short circuiting after 2 weeks
Posted: Tue May 11, 2021 9:32 pm
by Tigerrose2000
I've had my yocan uni for 2 weeks and it started blinking 3 times full battery, cleaned it, changed cartilage, tried new magnet, it doesnt work also I've been contacting website they dont respond brought to shop they say that yocan is helpful but seems to not be true. One website from youcan.usa says they wont fix it because it has to be the manufacturer or store i got from any ideas what else I can do? So ridiculous I only had it two weeks I have receipt and they still dont get back to me!
Re: Short circuiting after 2 weeks
Posted: Fri May 14, 2021 1:53 am
by Jimmy
Tigerrose2000 wrote: ↑Tue May 11, 2021 9:32 pm
I've had my yocan uni for 2 weeks and it started blinking 3 times full battery, cleaned it, changed cartilage, tried new magnet, it doesnt work also I've been contacting website they dont respond brought to shop they say that yocan is helpful but seems to not be true. One website from youcan.usa says they wont fix it because it has to be the manufacturer or store i got from any ideas what else I can do? So ridiculous I only had it two weeks I have receipt and they still dont get back to me!
Sorry for the the inconvenience.
Most of the times the Yocan UNI flash 3 times means it's wont detect the vape cartridge.
Please check the connection first.
Here are some tips:
1. Try to use a q-tip to clean the contact points, include the inside of the chamber, bottom for the 510 adapter and vape cartridges.
2. Loosen the 510 adapter.
3. Install a brand new vape cartridge or 510 adapter.
If it still wont work, please contact our after-sale team at
service@yocantech.com
Re: How to fix the flashing blink of Yocan Evolve Plus?
Posted: Wed Jun 16, 2021 5:28 pm
by DRicketts
My device was blinking 3 times after I changed to a brand new coil. Turned out that the brand new coil was defective and I just needed another one. All good now!