How to fix the Yocan Magneto Flashing Error?
Posted: Sun Jul 05, 2020 10:08 pm
If your Yocan Magneto device flashing light, 3 times blinking means it's short-circuit error, and 5 times blinking means it's not detect the atomizer.
Most of time, the incorrect connection resulted with the flashing errors.
4 tips for your refer to:
1. Clean the contact points with a q-tip, and you also can soak the Coil in isopropyl alcohol. But you have to DRY it when you re-install it.
2. Install a brand new coil
3. Pull out a little of the bottom contact point of the coil.
4. Contact the shop you bought it from, the sales guy will assist you fix it.
Most of time, the incorrect connection resulted with the flashing errors.
4 tips for your refer to:
1. Clean the contact points with a q-tip, and you also can soak the Coil in isopropyl alcohol. But you have to DRY it when you re-install it.
2. Install a brand new coil
3. Pull out a little of the bottom contact point of the coil.
4. Contact the shop you bought it from, the sales guy will assist you fix it.