How to Clean the Ceramic Chamber on Yocan Hit
Posted: Wed Apr 29, 2026 11:03 pm
Hi everyone,
We’ve recently received a question from a user about cleaning the ceramic chamber on the Yocan Hit—specifically whether the filter or heating part can be removed for cleaning.
Let’s clear that up
Can the ceramic chamber or filter be removed?
The short answer is: no.
The heating chamber in the Yocan Hit is not designed to be disassembled. Attempting to remove it may damage the device.
So how do you clean it properly?
Here are the recommended steps:
Power off the device and let it cool down completely before cleaning.
Empty the chamber and remove any leftover material.
Clean the mouthpiece separatelyIf it feels dirty or clogged, you can soak the mouthpiece in warm water for about 10 minutes, then rinse and let it dry completely.
Use a brush or cotton swabGently clean inside the chamber to remove residue.
Optional deep cleaningFor tougher buildup, lightly dab a cotton swab with a small amount of isopropyl alcohol and clean the affected areas. Make sure everything is fully dry before using the device again.
A quick tip:
Regular light cleaning will help prevent heavy buildup and keep your device performing at its best.
If you’ve run into similar issues or have your own cleaning tips, feel free to share them below!
— Yocan
We’ve recently received a question from a user about cleaning the ceramic chamber on the Yocan Hit—specifically whether the filter or heating part can be removed for cleaning.
Let’s clear that up
Can the ceramic chamber or filter be removed?
The short answer is: no.
The heating chamber in the Yocan Hit is not designed to be disassembled. Attempting to remove it may damage the device.
So how do you clean it properly?
Here are the recommended steps:
Power off the device and let it cool down completely before cleaning.
Empty the chamber and remove any leftover material.
Clean the mouthpiece separatelyIf it feels dirty or clogged, you can soak the mouthpiece in warm water for about 10 minutes, then rinse and let it dry completely.
Use a brush or cotton swabGently clean inside the chamber to remove residue.
Optional deep cleaningFor tougher buildup, lightly dab a cotton swab with a small amount of isopropyl alcohol and clean the affected areas. Make sure everything is fully dry before using the device again.
A quick tip:
Regular light cleaning will help prevent heavy buildup and keep your device performing at its best.
If you’ve run into similar issues or have your own cleaning tips, feel free to share them below!
— Yocan