How to Properly Fill Your Dyno Bubbler

[Rhea]

We’ve recently seen a few users in the community asking how to add water to the Yocan Dyno bubbler. It’s actually a pretty simple process, but if you’re using it for the first time, it’s totally normal to be unsure. Here’s a quick guide to walk you through it.

First, we recommend making sure the device is powered off before adding water. It’s safer and makes the whole process easier.
There are two common ways to fill your bubbler:

The first is using a dropper or a small filling tool. Simply aim it at the bubbler’s water inlet and slowly add a small amount of clean water. This method gives you better control and helps prevent overfilling.
If you don’t have a dropper on hand, you can also carefully pour a small amount of water directly from a cup. Just go slowly to avoid adding too much at once.
After filling, use a tissue or cloth to wipe off any excess water on the outside, and make sure everything is dry before reassembling the device.

Here are a few things to keep in mind:

Don’t overfill — too much water can affect performance
Avoid getting water into other parts of the device (such as the battery or connectors)
Always use clean water to prevent buildup or contamination
If you’re not sure about the right water level, a simple rule of thumb is this: you want enough water to provide basic filtration, but not so much that it splashes or gets pulled through during use.
If you’ve been unsure about this, hopefully this guide helps clear things up. And as always, feel free to drop any other questions in the community — we’re here to help.

For more products, please visit: Yocan